How To Operate; Ending Voice Guidance - Konica Minolta bizhub C654 User Manual

4.3 How to use voice guidance

How to operate

When voice guidance starts, the voice cursor (blue frame) is displayed to help you understand which part on
the Touch Panel is currently explained at a glance.
If necessary, use the keypad to move the voice cursor, and select or determine an item.
Tips
- The voice cursor is not displayed in the screen that does not support the voice guidance function.
Operate voice guidance using the Keypad.
Key
0
1
2
3
4
5
6
7
8
9
#
*
Tips
- If you press an invalid key on the currently displayed screen, you will hear voice guidance to signal that
the key is not available.

Ending voice guidance

Press Voice Guide to end voice guidance.
Voice guidance is also ended when:
- You have logged out of this machine.
- The System Auto Reset function has been started.
- This machine has changed to the power save mode.
- The power has been turned off.
bizhub C754/C654
Function
Reads out how to operate the Keypad.
Reads out the explanation of the currently displayed screen.
Reads out the setting items configured by the currently displayed function.
(Available only in copy or scan/fax mode in the Enlarge Display screen)
Stops the currently replayed voice guidance.
Moves the voice cursor to the left.
Select a key positioned by the voice cursor.
Moves the voice cursor to the right.
Reads out the setting items configured by the currently displayed function.
(Available only in copy or scan/fax mode in the Enlarge Display screen)
Reads out the previously read-out information again.
Reads out the currently selected key.
Turns up the volume one level.
While voice guidance is running, you can press # or * to adjust the volume
at any time.
Turns down the volume one level.
While voice guidance is running, you can press # or * to adjust the volume
at any time.
4
4-5