Manually Registering A License - Konica Minolta bizhub C654 User Manual

2.3

Manually registering a license

2.3 Manually registering a license
Access the Web site of the License Management Server (LMS), and manually register a target license in this
machine in the case when the machine is not able to be connected to the Internet.
You can obtain information (license code) required to enable an advanced function by registering a license.
When the obtained license code is entered on this machine, a target advanced function becomes available.
1
Purchase a required license kit.
% For details on the types of license kits, refer to page 1-3.
% A token certificate included in a license kit is required to register a license on this machine using
LMS.
% For details on purchasing a license kit, contact your service representative.
2
Tap [Utility] - [Administrator Settings] - [License Settings] - [Get Request Code], select [Yes], then press
[OK].
This displays the serial number of this machine and the request code on the screen.
% Tapping [Print] allows you to print the serial number and request code displayed on the screen.
% When necessary, you can get a request code using Web Connection. In the administrator mode,
select [Maintenance] - [License Settings] - [Get Request Code] to get a request code. Make a note
on the serial number and request code displayed on the screen, or print out the target page on the
Web browser.
3
Open the Web browser through a computer connected to the Internet, and connect this machine to the
Web site of the License Management Server (LMS).
% The Web site address of the License Management Server is shown in the token certificate included
in the license kit.
4
Register the following information of this machine on the Web site of the License Management Server
(LMS).
Request code
Serial number
Token number
5
Check the registered contents, and issue a license code.
You will receive function and license codes.
bizhub C754/C654
Used to identify this machine.
This code is displayed on the screen when issued.
Displays the serial number of this machine.
This number is displayed on the same screen for a request code when you get a
request code.
Used to identify a contract that is set up to purchase a license for an advanced
function.
A token number is shown in the token certificate.
2
2-4