[Punch Vertical Position Adjustment]; [Punch Horizontal Position Adjustment] - Konica Minolta bizhub C654 User Manual

[Punch Vertical Position Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Punch Vertical Position Adjustment]
If the positions of the punch holes on the paper are displaced vertically, use this option to adjust the punch
hole positions.
Copy after configuration, then repeat adjustments as required.
Settings
[Paper Size]
[Adjust Value]
Tips
- This item is available if the Punch Kit PK-521 is installed in the optional Finisher FS-535.
- Make adjustments while checking paper punched at a displaced position.
- The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.

[Punch Horizontal Position Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Punch Horizontal Position Adjustment]
If the positions of the punch holes on the paper are displaced sideways, use this option to adjust the punch
hole positions.
Copy after configuration, then repeat adjustments as required.
Settings
[Finisher]/[Post Inserter]
bizhub C754/C654
Description
Select the size of paper subject to punch hole position adjustment.
Enter an adjustment value between -5.0 and 5.0 mm by tapping [-] and [+].
• [-]: Move the punch position downward.
• [+]: Move the punch position upward.
[0.0 mm] is specified by default.
Description
Select the position subject to punch hole position adjustment.
• [Finisher]: This item is available if Punch Kit is installed in the optional
Finisher.
• [Post Inserter]: This item is available if the Punch Kit PK-521 and Post
Inserter are installed in the optional Finisher FS-535.
17
17-16