[2Nd Tri-Fold Position Adjustment]; [Tri-Fold Output Setting] - Konica Minolta bizhub C654 User Manual

Tips
- This item is available if the Saddle Stitcher is installed in the optional Finisher.
- Make adjustment while checking paper folded at a displaced position.
- The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.

[2nd Tri-Fold Position Adjustment]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [2nd Tri-Fold Position Adjustment]
If the tri-fold positions are not located evenly, use this option to adjust the second fold position.
Copy after configuration, then repeat adjustments as required.
Settings
[Paper Size]
[Adjust Value]
Tips
- This item is available if the Saddle Stitcher is installed in the optional Finisher.
- Make adjustment while checking paper folded at a displaced position.
- The value you set by selecting [All] in [Paper Size] will be added to the setting for each paper size.

[Tri-Fold Output Setting]

To display: [Utility] - [Administrator Settings] - [System Settings] - [Expert Adjustment] - [Finisher Adjustment]
- [Tri-Fold Output Setting]
Use this option to select whether to output tri-folded paper to the normal position or a position further away
from the normal position set for this machine.
[Normal Output] is specified by default.
Tips
- This item is available if the Saddle Stitcher SD-521 is installed in the optional Finisher FS-535.
bizhub C754/C654
Description
Select the size of paper that is used to adjust the fold position.
Enter an adjustment value between -10.0 and +10.0 mm by tapping [-] and
[+].
• [-]: Move the fold position to the left.
• [+]: Move the fold position to the right.
[0.0 mm] is specified by default.
17
17-15