Different Size Originals - Canon MF7280 - ImageCLASS B/W Laser Facsimile Manual

Different Size Originals

This mode enables you to scan different size originals together.
IMPORTANT
• The Different Size Originals mode cannot be used with the Document Size or Stamp
mode.
• The Different Size Originals mode cannot be used when sending a fax document in the
Direct Sending mode.
• If the originals are placed in the feeder, make sure that the different size originals are of
the same weight (paper type).
•
Align the top edge of the originals with the back edge of the feeder or the platen glass if
you are placing originals with different widths. ("Width" refers to the vertical measurement
of the paper from the front of the machine to the back of the machine when the paper is
placed in the feeder or on the platen glass.)
• Set different size originals in the following combinations. Other combinations may
damage the originals.
- 11" x 17" and LGL, LTR and LGL, LTR and LTRR
• If you place originals with different widths into the feeder, the originals may move slightly
when fed to the scanning area. As a result, the images may be scanned as slanted.
• If the Different Size Originals mode is set, the scanning speed may be slower than
normal.
1
Place your originals ➞ specify the destination.
NOTE
• For instructions on placing your originals, see "Placing Originals," on p. 1-34.
• For more information on specifying the destination, see "Dialing Methods," on
p. 2-35.
2
Press the Scan Settings drop-down list ➞ press [Option].
If necessary, see the screen shot in step 2 of "Specifying the Document Size," on
p. 2-5.
2-17
Scan Settings
2