New Address Tab - Canon MF7280 - ImageCLASS B/W Laser Facsimile Manual

2
5

New Address Tab

This section describes the procedure for specifying a new destination that has not
been stored in the Address Book.
IMPORTANT
If Restrict New Addresses in System Settings (from the Additional Functions screen) is
set to 'On', you cannot specify a destination using the New Address tab. (See Chapter 9,
"System Settings," in the Sending Guide.)
NOTE
• If you frequently send documents to the same destinations, store these destinations in
the Address Book beforehand. (See "Storing Destinations," on p. 5-5.)
• You can specify only one destination at a time using the New Address tab.
•
For detailed procedures to specify an I-fax, e-mail, and file server address using the New
Address tab, see Chapter 4, "Sending Documents," in the Sending Guide.
1
2-40
Dialing Methods
Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on
the touch panel display ➞ press
is complete, press [Done].
Scanning starts, and the document is sent to the specified destination.
(SEND) ➞ place your originals.
Press
NOTE
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
(Start) once for each original. When scanning