Scan Settings
To match the original you are sending, set the document size, resolution, density,
image quality, and original type.
IMPORTANT
Color mode setting is not available when sending faxes. Only the B&W mode is available.
Document Size
You can manually specify the document size when the machine cannot detect the
paper size automatically, such as when scanning transparencies.
IMPORTANT
•
You cannot select [Auto] when scanning the following types of originals. Specify the size
of these documents manually.
- Nonstandard size originals
- Highly transparent originals, such as transparencies
- Originals with an extremely dark background
- STMT or STMTR originals that are placed on the platen glass
•
When using Direct Sending to send a fax and you place the originals into the feeder, the
Document Size setting you specify is disabled.
•
If you specify the document size, you cannot use the Stamp and Different Size Originals
mode.
NOTE
The default setting is 'Auto'.
Specifying the Document Size
1
Place your originals ➞ specify the destination.
NOTE
•
For instructions on placing your originals, see "Placing Originals," on p. 1-34.
•
For more information on specifying the destination, see "Dialing Methods," on
p. 2-35.
2-5
Scan Settings
2