Messages Displayed When Using The Scanner Function - Ricoh Aficio MP 6002 User Manual

Message
"You do not have a privilege
to use this function. This
operation has been
cancelled."
Messages during Direct print from a removable memory device
Message
"99: Error"
If printing does not start, contact your service representative.
• The contents of errors may be printed on the Configuration Page. Check the Configuration Page in
conjunction with the error log. For details about how to print the Configuration Page, see "List / Test
Print", Print .

Messages Displayed When Using the Scanner Function

This section describes likely causes of and possible solutions for the error messages that appear on the
control panel. If a message not described here appears, act according to the message.
Message
"Authentication with the
destination has failed. Check
settings. To check the current
status, press [Scanned Files
Status]."
Causes
The logged in user does not
have the privileges to
register programs or change
the paper tray settings.
Causes
This data cannot be printed.
The specified data is either
corrupt or not supported by
the Direct printing function
from removable memory
devices.
Causes
The entered user name or
password was invalid.
When Messages Are Displayed on the Control Panel
Solutions
For details about how to set
permissions, see Security Guide
Solutions
Check that the data is valid. For details
about the kinds of data supported by
the Direct printing function from
removable memory devices, see
"Direct Printing from a Removable
Memory Device", Print
Solutions
• Check that the user name and
password are correct.
• Check that the ID and password
for the destination folder are
correct.
• A password of 128 or more
characters may not be
recognized.
.
.
199