Ricoh Aficio MP 6002 User Manual page 199

Message
"Output tray has been
changed."
"Print overrun."
"Printing privileges have not
been set for this document."
"Punch has been cancelled."
"Receiving data failed."
"Selected ppr. size is not
supported. Job was
cancelled."
Causes
The output tray was
changed because the paper
size of the specified output
tray is limited.
Images were discarded
while printing.
The PDF document you have
tried to print has no
privileges to print.
Punch printing was
canceled.
Data reception was aborted. Resend the data.
Job reset is automatically
performed if the specified
paper size is incorrect.
When Messages Are Displayed on the Control Panel
Solutions
Specify the proper output tray.
In [Printer Features], under [System],
set [Memory Usage] to [Frame
Priority].
PCL 5e
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PCL 6
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
PostScript 3
Select a lower resolution on the
printer driver. For details about
how to change the resolution
setting, see the printer driver Help.
Contact the owner of the document.
Check the paper orientation, print
orientation, and then punch position.
Certain settings can produce print
results that might not be as expected.
Specify the correct paper size, and
then print the file again.
197