Ricoh Aficio MP 6002 User Manual page 161

Problem
Misfeeds occur frequently.
Misfeeds occur frequently.
Wrinkling occurs when gate
fold, letter fold-in, or letter
fold-out is applied.
When you print Z-folded
paper, the machine
indicates that the output tray
is full even though the
amount of output paper on
the tray is less than the stack
capacity.
Causes
Paper of undetectable size
has been loaded.
There is a foreign object on
the finisher tray.
Wrinkling can occur if gate
fold, letter fold-in, or letter
fold-out is applied to B4 JIS
1
, A3 , 8 / 14 , 11
2
17 , 8K , or larger
sizes of paper.
The Z-fold support tray is not
set.
When You Have Problems Operating the Machine
Solutions
• Remove misfed paper. For details
about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting .
• If you load a paper size that is not
selected automatically, you need
to specify the paper size with the
control panel. For details about
specifying paper size with the
control panel, see "Changing to a
Size That Is Not Automatically
Detected", Paper Specifications
and Adding Paper
• Remove misfed paper. For details
about removing jammed paper,
see "Removing Jammed Paper",
Troubleshooting .
• Do not place anything on the
finisher tray.
When applying gate fold, letter fold-in,
or letter fold-out to paper larger than
A4, we recommend you enable image
reduction and use paper no larger
than A4 .
Set the Z-fold support tray for finisher
or multi-folding unit. For details about
how to add the Z-fold support tray, see
"Using the Z-fold Function",
Troubleshooting .
.
159