Ricoh Aficio MP 6002 User Manual page 200

10. Troubleshooting
Message
"Sending data failed."
"Staple has been cancelled." Stapling printing was
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. memory."
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. number of
files."
"The print job has been
cancelled because capture
file(s) could not be stored:
Exceeded max. number of
pages per file."
"The selected paper type is
not supported. This job has
been cancelled."
"You do not have a privilege
to use this function. This job
has been cancelled."
"You do not have a privilege
to use this function. This job
has been cancelled."
198
Causes
The machine received a
command to stop
transmission from the printer
driver.
canceled.
The hard disk became full
after a file was stored.
The maximum file capacity
of the Document Server was
exceeded.
The maximum page
capacity of the Document
Server was exceeded.
Job reset is automatically
performed if the specified
paper type is incorrect.
The entered login user name
or login password is not
correct.
The logged in user is not
allowed to use the selected
function.
Solutions
Check if the computer is working
correctly.
Check the paper orientation, paper
quantity, print orientation, and staple
position. Certain settings can produce
print results that might not be as
expected.
Delete the files stored in the Document
Server or reduce the file size to be sent.
Delete the files stored in the Document
Server.
Delete some of the files stored in the
Document Server or reduce the number
of pages that you want to send.
Specify the correct paper type, and
then print the file again.
Check that the user name and
password are correct.
For details about how to set
permissions, see Security Guide .