Table of Contents
Advertisement
18 electrolux
Pyrolytic 1 (P I), Time: 2 hours. = 30 mins
Heating-up +1 hour. at 480 °C + 30 mins
Cooling down time.
Pyrolytic 2 (P 2), Time: 2 hours. 30 mins. =
30 mins Heating-up +1 hour. 30 mins. at 480
°C + 30 mins Cooling down time.
The pyro duration time cannot be changed.
Before performing the pyrolysis, all side
rails must have been removed.
To activate the pyrolytic cleaning
function proceed as follows:
1. Touch control
Touch the control
Pyro function symbol
appears on the display.
The symbol
will flash on the display at the same time
and an acoustic signal will sound.
This means that, before activating the py-
rolytic cleaning function, you have to re-
move all the oven accessories and the
side rails from the oven cavity.
2. The "Cooking time" symbol
for 5 seconds; during this time, touch
'
' or '
' control to select the pyro-
lytic 1 (P I) or pyrolytic 2 (P 2) function
to switch on the oven.
repeatedly, until the
(level 1 - P I)
and the indicator Pyro
will flash
3. When you choose the desired pyrolytic
function, Pyro will flash on the display
waiting for confirmation to start the pyro-
lytic cleaning function.
4. To confirm the desired pyrolytic cleaning
function, touch control
flashing on the display, the symbol
disappears and the acoustic signal stops.
The oven lamp switches off and the py-
rolytic cleaning cycle starts.
As soon as the oven heats up, the ther-
mometer symbol rises slowly , indicating
that the temperature inside the oven is
increasing. .
To programme the pyrolytic cleaning
cycle (delayed start, automatic stop)
If you desire, you can programme the starting
and ending time of the pyrolytic cleaning cy-
cle.
1. Touch control
Touch control
Pyro function symbol
appears on the display.
The symbol
will flash on the display at the same time
and an acoustic signal will sound.
This means that, before activating the py-
rolytic cleaning function, you have to re-
move all the oven accessories and the
side rails from the oven cavity (see the
previous chapter).
2. The Cooking Time symbol
for some seconds; during this time touch
'
' or '
' controls to select the py-
rolytic 1 (P I) or pyrolytic 2 (P 2) function.
3. When you choose the desired pyrolytic
function, Pyro will flash on the display
waiting for confirmation to start the pyro-
lytic cleaning function.
At this time, touch the time function con-
trol
.
. Pyro stops
to switch on the oven.
repeatedly, until the
(level 1 - P I)
and the indicator Pyro
will flash
Advertisement
Table of Contents
