Changing Door Stop - Electrolux TK K2 E User Manual

34 electrolux installation
The power supply cable must be accessible after installing the machine.
Connect the machine to an earthed socket, in accordance with current wiring regu-
lations.

Changing door stop

The door stop may only be changed by a specialist. If necessary, please contact
our after-sales service or your specialist dealer.
Before changing the door stop, disconnect the mains plug.
A
B
A
1. Open loading door.
2. Unscrew hinge A from the front of the machine and take off the loading door.
3. Remove cover plates B and C. To do this, insert a thin screwdriver into the slots
as shown in the illustration, press downwards slightly and pry out the cover
plates.
C
D
C