22 electrolux care and cleaning
The condensate can be used as distilled water, e.g. for steam ironing.
However first filter the condensate (e.g. with a coffee filter) to remove any
residue and small pieces of fluff.
Cleaning heat exchanger
If the warning led is lighting, the heat exchanger needs to be cleaned.
Operating when the heat exchanger is blocked with fluff can damage the
dryer. This also increases energy consumption.
1. Open door.
Open door in plinth. To do this, press the release button on the bottom of the
door aperture and open the door in the plinth to the left.
3. Clean fluff from the inside of the door and the heat exchanger front chamber.
Wipe the door seal with a damp cloth.
Turn both lock washers inwards.