2 electrolux Electrolux. Thinking of you. Share more of our thinking at www.electrolux.com Contents Important safety information Drying rack Environment Care and cleaning Product description What to do if ... Control panel SETTINGS First start-up Technical data Sorting and preparing laundry...
Page 3
3 • Risk of fire: items that have been spotted • This appliance is heavy. Care should be taken when moving it. or soaked with vegetable or cooking oil constitute a fire hazard and should not be • When unpacking the appliance, check that placed in the tumble dryer.
4 electrolux • Do not use the machine without a lint filter • Caution - hot surface : Do not touch the or with a damaged lint filter. Risk of fire! door light cover surface when the light is • Only fill the water reservoir for steam treat- switched on.
5 Warning! When disposing of old Remove the door hook and ensure it is no longer lockable to prevent young appliances, remove the mains cable and dispose of together with the plug. children being trapped inside. Product description Control panel...
6 electrolux Control panel Programme knob and Aus (OFF) switch Zeitvorwahl (DELAY START) button Function buttons Status led Start / Pause button Display Display 2:00 COTTONS EXTRA DRY COTTONS EXTRA DRY 4:02 1200 14:17 16:05 Drying The display can show the following basic...
8 electrolux Important! In case of mistake or at any time To select the time please use Option button to confirm press OK. after the first time use a short-cut is provided to avoid going through the SETTINGS. See also the chapter " SETTINGS".
Page 9
9 Important! Important! • The following textiles cannot be treated • Do not use dry cleaning sets in combina- using a ProSteam programme: tion with ProSteam programmes. leather, textiles with large metal, wooden Preparing laundry or plastic parts, textiles with rusting metal •...
10 electrolux Opening loading door / loading laundry 1. Open loading door: Use force to push against the loading door (push point - see picture) 2. Load your laundry (do not force it in). Caution! Do not jam laundry in be- tween the loading door and rubber seal.
11 To activate this system turn the valve in ON steam water inlet - for manual refilling position. When the valve is ON the steam of steam water container. water tank will be filled during the next drying water recirculation system valve/filter.
Page 12
12 electrolux tings and material properties of the processes, we recommend running textile. The results can be improved the first few ProSteam programmes if necessary by using different pro- at low steam levels and with a small grammes and steam volumes. For...
Page 13
13 tortion to the shape of a garment level is selected, garments may lose which might occur in few cases, can their shape. If too low steam level is be remedied by ironing. selected, creases may remain. Selecting the programme...
Page 14
14 electrolux down the Option and OK buttons simultane- 1. Select the programme and additional ously for 5 seconds. functions/options if necessary. – Before programme is started: appliance 2. Press the Zeitvorwahl (DELAY START) cannot be used button as many times as necessary.
Page 15
15 ProSteam programme complete / removing laundry After the ProSteam cycle is completed , 0:00 The steam water tank is empty. Please fill starts flashing and alternatively the messag- es: Finished. Please remove the laundry and it and then press START.
16 electrolux Drying Drying programmes overview Programme Application/properties Baumwolle (COTTONS) Extratrocken Thorough drying of thick or multi- layered fabrics, e.g. terry towelling 7 kg (EXTRA DRY) items, bathrobes. Schranktrock- Thorough drying of fabrics of even thicknesses, e.g. terry towelling en (CUP- 7 kg items, knitwear, towels.
Page 17
17 Programme Application/properties For drying woollen fabrics after they have been washed, using warm air at minimum mechanical load (Follow section “Sorting and preparing washing”). Recommendation: Remove fabrics immediately after drying, Wolle/Sports- as no anti-crease programme follows. chuhe Korb...
Page 18
18 electrolux 3. Press repeatedly Option button to select down the Option and OK buttons simultane- proper option. Selection is marked by ously for 5 seconds. rectangular border. – Before programme is started: appliance 4. Press OK button to activate it. Suitable...
19 0:10 minutes is in the display (corre- Warning! Laundry and drum can sponding to the cooling phase). become hot. Risk of burns! 2. Press the Zeitwahl (TIME) button repeat- 2. Load or remove laundry items. edly until the desired programme dura- 3.
20 electrolux Important! Before drying rack installation Drying tips check the dryer drum. It must be empty! • Sport shoes cannot be dry without the drying rack - drum damage. Installation and use 1. Open the loading door. for the best drying result spread the wool-...
Page 21
21 2. Use a damp hand to clean the micro- fine filter, which is built into the lower part of the loading aperture. 6. Remove fluff from fine strainer. It is best 3. After a period of time, a patina due to to use a damp hand for this purpose.
Page 22
22 electrolux 2. Pour condensed water out into a basin or similar receptacle. If the fine strainer is not fitted, the large mesh filter will not snap into place and the loading door cannot be closed. Cleaning the door seal Wipe the door seal with a damp cloth imme- diately after the drying cycle has finished.
Page 23
23 Using the attached canister to filter: Pour the water out of the container straight through the filter at the top of the canis- ter. Cleaning heat exchanger If the message: Please clean the condenser is shown in the display, the heat exchanger needs to be cleaned.
24 electrolux 7. Turn the valve/filter in ON position. Use a standard domestic cleaner (e.g. vinegar-based cleaner) to wipe down the Cleaning the drum inside of the drum and drum ribs. Caution! Do not use abrasives or steel Clean operating screen and housing wool to clean the drum.
Page 25
25 Select a different programme Wrong programme selected. the next time you dry (see “Pro- gramme chart” chapter). Lint filters clogged. Clean lint filters. Fluff filter clogged. Clean fluff filter. Heat exchanger clogged with Clean heat exchanger. lint. Observe recommended loading Overloading of laundry.
26 electrolux Automatic process, there is no Particularly high room tempera- fault with the appliance. If possi- ture. ble, lower the room tempera- ture. Check colour fastness of tex- Discoloration Colour fastness of textiles. tiles. Only treat textiles together if they are a similar colour.
27 CONTRAST 3. Press Option until you set right hardness level. 1. Press Option button until CONTRAST se- 4. Press OK to confirm. lected. 2. Press OK to confirm - frame around bar available selections: indicator starts blinking. –...
28 electrolux Domestic Permissible ambient temperature + 5°C to + 35°C Consumption values The consumption values have been established under standard conditions. They may de- viate when the machine is operated in domestic circumstances. Energy consumption in kWh / average Programme drying time in min.
Page 29
29 Important! Before appliance use all packaging parts • The hot air emitted by the tumble dryer can and drying rack must be removed from reach temperatures of up to 60°C. The ap- the drum. The inside of the drum must pliance must therefore not be installed on be clean.
Page 30
30 electrolux Changing door stop Warning! Before changing the door stop, disconnect the mains plug. Open loading door. Remove right polystyrene part by pulling 2. Unscrew hinge A from the front of the it. Inside this part there is a bottle of dis- machine and take off the loading door.
31 Note regarding contact protection: The to be drained, it must however remain in its intended position in the machine. machine is only secure for operations again once all plastic parts have been inserted. Fixed hose has to be on the suitable height...