Electrolux TK K2 E User Manual page 26

26 electrolux what to do if ...
Loading door does
not close.
When a button is
pressed, led above
Start/Pause button
is lighting in yellow
temporarily.
Programme inactive,
empty water tank
warning led is light-
ing.
Drying cycle ends
shortly after pro-
gramme starts.
Drying cycle lasts an
unusually long time.
Note: After around 5
hours the drying cy-
cle ends
automatically (see
„Drying cycle com-
plete ").
Fine strainer not in place
and/or mesh filter not locked
in place.
Washing protection. After
the start of the programme,
the option can no longer be
set.
Condensate tank is full.
Not enough washing loaded
or washing loaded is too dry
for selected programme.
Lint filter clogged.
Fluff filter clogged.
DELICATE Schon button
pressed and/or load volume
too big.
Laundry insufficiently spun.
Particularly high room
temperature. Temporary
switching off of the com-
pressor to avoid overload.
Install fine strainer and/or
snap large mesh filter into
place.
Turn the programme knob
to OFF Aus. Set the pro-
gramme again.
Empty condensate tank,
then start programme with
Start/Pause button.
Select time programme or
higher drying level (e.g. EX-
TRA DRY Extratrocken in-
stead of CUPBOARD DRY
Schranktrocken).
Clean lint filter.
Clean fluff filter.
Reduce load volume.
Laundry must be adequately
spun.
Automatic process, there is
no fault with the appliance. If
possible, lower the room
temperature.