Table of Contents
Advertisement
Prestige 2602HWL-D3A Support Notes
1. Trace LAN packet
1.1 Disable the capture of the WAN packet by entering:
sys trcp channel mpoa00 none
1.2 Enable the capture of the LAN packet by entering:
sys trcp channel enet0 bothway
1.3 Enable the trace log by entering:
sys trcp sw on
&
sys trcl sw on
1.4 Wait for packet passing through the Prestige over LAN
1.5 Disable the trace log by entering:
sys trcp sw off
&
sys trcl sw off
1.6 Display the trace briefly by entering:
sys trcp brief
1.7 Display specific packets by using:
sys trcp parse <from_index> <to_index>
2. Trace WAN packet
sys trcp channel enet0 none
1.1 Disable the capture of the LAN packet by entering:
sys trcp channel mpoa00 bothway
1.2 Enable the capture of the WAN packet by entering:
sys trcp sw on
&
1.3 Enable the trace log by entering:
sys trcl sw on
1.4 Wait for packet passing through the Prestige over WAN
sys trcp sw off
&
1.5 Disable the trace log by entering:
sys trcl sw off
sys trcp brief
1.6 Display the trace briefly by entering:
sys trcp parse <from_index> <to_index>
1.7 Display specific packets by using:
CLI Command List
The latest CI command list is available in release notes of every ZyXEL firmware release. Please go to
ZyXEL public WEB site
http://www.zyxel.com/support/download.php
to download firmware package
(*.zip), you should unzip the package to get the release note in PDF format.
237
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Advertisement
Table of Contents
