Call Hold Setup; Call Waiting Setup - ZyXEL Communications Prestige 2602HWL-D3A Support Manual

Number specify here.
Condition Select under what circumstances you want the Prestige to use this call
forwarding entry.
Select Unconditional to have the Prestige immediately forward any calls
from the number specified in the Incoming Call Number field to the
number in the Forward to Number field.
Select Busy to have the Prestige forward any calls from the number
specified in the Incoming Call Number field to the number in the Forward
to Number field when your SIP account has a call connected.
Select No Answer to have the Prestige forward any calls from the number
specified in the Incoming Call Number field to the number in the Forward
to Number field when the No Answer Waiting Time period expires
(whether or not the no answer feature is enabled in the Forward to
Number Setup section).
Select Block to have the Prestige reject calls from the number specified in
the call forwarding entry.
Select Accept to have the Prestige allow calls from the number specified in
the Incoming Call Number field.

Call Hold setup

Prestige allows user agent to interrupt communications on an existing call.
Call hold allows you to put a call (A) on hold by pressing the flash key.
If you have another call, press the flash key to switch back and forth between caller A and B by
putting either one on hold.

Call Waiting setup

This allows you to place a call on hold while you answer another incoming call on the same
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602HWL-D3A Support Notes
143