ZyXEL Communications Prestige 2602HWL-D3A Support Manual page 82

Press ENTER to Confirm or ESC to Cancel:

Time Service in Prestige
There is no RTC (Real-Time Clock) chip so the Prestige should launch a mechanism to get current time and
date from external server in boot time. Time service is implemented by the Daytime protocol(RFC-867), Time
protocol(RFC-868), and NTP protocol(RFC-1305). You have to assign an IP address of a time server and then,
the Prestige will get the date, time, and time-zone information from this server.
Menu 24.10 - System Maintenance - Time and Date Setting
Use Time Server when Bootup=
Time Server IP Address=
Current Time: 00 : 11 : 38
New Time (hh:mm:ss): 00 : 11 : 36
Current Date: 2004 - 01 - 01
New Date (yyyy-mm-dd): 2004 - 01 - 01
Time Zone= GMT+0800
Daylight Saving= No
Start Date (mm-dd): 01 - 00
End Date (mm-dd): 01 - 00
Session Options:
Edit Traffic Redirect= No
Daytime (RFC-867)
202.132.154.1
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602HWL-D3A Support Notes
Edit Filter Sets= No
Idle Timeout(sec)= 100
82