Table of Contents
Advertisement
For example, if you need to block the call from 3333 (SIP Number) for 2 hours, you just need to
input *95#3333*2# on the phone keypad, and it will implement this feature.
Hot Line (Auto Dial)
This feature enables the device to make a call to a predefined number as soon as the phone is
off hook.
Application Scenario:
1. Configure the Hot Line setting first.
2. A lifts phone.
3. A will automatically dial the preconfigured number.
You may configure Hot Line (Auto Dial) easily on web GUI: VoIP > Phone > Analog Phone >
Advanced
Or by CLI command setting.
The CLI commands below are used to configure the Hot Line:
voice config fxs autodial enable
voice config fxs autodial number
voice config fxs diallonginterval
dialing out
For example, if you want SIP1 phone to call 888888 automatically after the phone is off hook and
without pressing any button on the phone keypad in 5 seconds.
The CLI commands below could implement it:
ras> voice config fxs index 1
ras> voice config fxs autodialenable 1 enable
ras> voice config fxs autodialnumber 1 888888
ras> voice config fxs diallonginterval 1 5
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602HWL-D3A Support Notes
// Enable Hot Line (Auto Dial) Feature
// Set Hot Line number
// Set the interval between phone picking up and
157
Advertisement
Table of Contents
