Table of Contents
Advertisement
1. The P2602HWL-D3A includes a DSL cable and a RJ-11 cable. Connect the DSL cable to the
DSL port and connect RJ-11 to Lifeline port.
2. Connect the RJ11 to the splitter phone jack or a telephone wall jack
3. Connect the DSL cable to the splitter modem jack or ADSL line
4. Connect the splitter jack where it label Line to ADSL line from the ISP.
1.
The P2602HWL-D3A includes a DSL cable and a RJ-11 cable. Connect the DSL cable to the
DSL port and connect RJ-11 to Lifeline port.
2.
You need to obtain a regular PSTN Y connector from regular phone shop.
3.
Connect the RJ-11 to one of the output jack on the Y connector
4.
Connect the DSL cable to the other output jacket on the Y connector
5.
Connect the Y connector input port with a phone cable to the wall Jack or line from ISP.
VoIP Application Notes
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602HWL-D3A Support Notes
Figure 2 Splitterless type
127
Advertisement
Table of Contents
