ZyXEL Communications Prestige 2602HWL-D3A Support Manual page 34

Step 1:
In this case, we need to configure Address Mapping Set 1 from Menu 15.1-Address Mapping Sets. Therefore
we must choose the Full Feature option from the NAT field in menu 4 or menu 11.3, and assign IGA3 to
Prestige WAN IP Address.
ISP's Name= MyISP
Encapsulation= PPPoE
IP Address Assignment= Static
Network Address Translation=
Press ENTER to Confirm or ESC to Cancel:
Step 2:
Go to menu 15.1 and choose 1 (not 255, SUA this time) to begin configuring this new set. Enter a Set Name,
choose the Edit Action and then select 1 from Select Rule field. Press [ENTER] to confirm. See the following
setup for the four rules in our case.
Rule 1 Setup: Select One-to-One type to map the FTP Server 1 with ILA1 (192.168.1.10) to IGA1.
Menu 15.1.1.1 - - Rule 1
Type:
Local IP:
Menu 4 - Internet Access Setup
Service Type= N/A
My Login= cso@zyxel
My Password= ********
Retype to Confirm= ********
Idle Timeout= 100
IP Address= IGA3
IP Subnet Mask= N/A
Gateway IP Address= N/A
One-to-One
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602HWL-D3A Support Notes
Full Feature
34