ZyXEL Communications Prestige 2602HWL-D3A Support Manual page 100

MAC Address This field specifies those MAC Addresses that you want to add in the list.
If you use WEB configuration, the MAC Address Filter configuration are as shown below.
1. Using a web browser, login AP by giving the LAN IP address of AP in URL field. Default LAN IP is
192.168.1.1, default password to login web configurator is 1234.
2. Click Network, and click Wireless LAN tab on the left.
3. Click MAC Filter link and check Active MAC Filter to enable MAC Filter.
4. Select the Filter Action to allow or deny association from hosts in the list.
5. Enter the MAC Addresses which you may want to apply the filter to allow or block associations from.
6. Click Apply to make your setting work.
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602HWL-D3A Support Notes
100