Fan Speed
(1) Motor speed (high speed, normal speed, low speed).
(2) Remote controller setting fan speed. (H, M, L)
(3) Relation of operating mode between fan speed.
FAN ONLY
H
M
L
Sleep Mode
(1) When you are going to sleep, select sleep button in remocon and the unit controls the room to the desired
temperature. (The unit will not operate after 4 hour)
(2) For changing the temperature.
• Mode I (L1)
• The unit will not operate after 4 hour.
• Mode II (L2)
• The unit will not operate perfectly after 10 hour.
(3) To cancel sleep mode, press the SLEEP button again or press the MODE button once. : the SLEEP indicator will
disappear in the display.
3min. Time Delay of Compressor
In normal operation, there is a time delay of three minutes between turn off and turning back on including
initial power up.
COOL
H
H
M
M
L
L
Difference
desired temperature
between room
temperature ( C)
Temperature
SET ON
SET OFF
TURBO
H
-
-
1°C
0.5 C
0.5 C
1°C
Desired
0
0.5
SET TIME
Desired
Temperature
+1˚C
2hr
2hr
2hr
2hr
10
1°C
0.5 C
1.0
HOUR
+1˚C
2hr
Need help?
Do you have a question about the DWC-121R and is the answer not in the manual?
Questions and answers