Maintenance; Precautions - Fujitsu MBA3147RC - Enterprise 147 GB Hard Drive Product Manual

6.2

Maintenance

See Section 5.1 and 6.5 for notes on packaging and handling when returning the HDD.
Data loss
Save data stored on the HDD to other media before requesting repair.
Fujitsu does not assume responsibility if data is corrupted during
servicing or repair.
6.2.1

Precautions

Take the following precautions to prevent injury during maintenance and troubleshooting:
High temperature
To prevent injury, never touch the HDD while it is hot. The DE and
LSI become hot during operation and remain hot immediately after
turning off the power.
Electrical shock
Never touch the HDDs while power-feeding.
Take the following precautions to prevent HDD damage during maintenance and troubleshooting:
Damage
C141-E252
Always ground yourself with a wrist strap connected to ground
before handling. ESD (Electrostatics Discharge) may cause the
damage to the device.
Never use a conductive cleaner to clean the HDDs.
Never remove any labels from the HDD or deface them in any
way.
Never remove the PCBA.
Never open the HDD for any reason.
6.2 Maintenance
69