Maintenance Levels; Tools And Test Equipment - Fujitsu MBA3147RC - Enterprise 147 GB Hard Drive Product Manual

6.2.3

Maintenance levels

If an HDD is faulty, replace the whole HDD since repair requires special tools and environment.
This section explains the two maintenance levels.
(1) Field maintenance (HDD replacement)
This replacement is done at the user's site.
Replacement uses standard tools.
Replacement is usually done by the user, retail dealer, distributor, or OEM engineer.
(2) Factory maintenance (parts replacement)
This replacement can only be done by Fujitsu.
Replacement includes maintenance training and OEM engineer support. OEM engineers usually
support retail dealers and distributors.
Replacement uses factory tools and test equipment.
6.2.4

Tools and test equipment

HDD troubleshooting and repair in the field require only standard hand tools. No special tools or test
equipment are required.
This manual does not describe the factory-level tools and test equipment.
C141-E252
6.2 Maintenance
71