Figure 6.4 Fraction Packaging - Fujitsu MBA3147RC - Enterprise 147 GB Hard Drive Product Manual

(2) Put unitary packaging (FCELL) in the cushion (lower).
At this time, FCELL is put in the cushion (lower) so that the FCELL opening may become
downward. The I/F connector may become upward.
For less than 20 HDDs, insert the HDDs starting from the slot with the smallest number in Figure
6.4. Then place the empty FCELL in the empty slot.
(3) Hold the HDD with the cushion (upper)
(4) Put the desiccant (100g) into the conductivity bag
(5) Put the long desiccant between the cushion (upper)
(6) Seal the conductivity bag with the packaging tape
(7) Close the cardboard box with the packaging tape
(Attach the tape in 'H' figure at the tape.)
C141-E252
Figure 6.4 Fraction packaging
6.5 Packaging
79