Change Password; Load Factory Default - Moxa Technologies NPort IA 5250 series User Manual

NPort IA5150/5250 Series User's Manual

Change Password

Input the "Old password" and "New password" to change the password. Leave the password boxes
blank to erase the password. If the password is erased, then NPort IA5150/5250 will not have
password protection.
ATTENTION
If you forget the password, the ONLY way to configure NPort IA5150/5250 is by using the
Reset button on NPort IA5150/5250's casing to "Load Factory Default."
Remember to export the configuration file using NPort Administrator when you finish the
configuration. By using the Import function of NPort Administrator, your configuration can be
re-loaded into NPort IA5150/5250 after using "Load Factory Default." Refer to Chapter 6 for
more details about the Export and Import function.

Load Factory Default

This function will reset all of NPort IA5150/5250's settings to the factory default values. Be aware
that previous settings will be lost.
Web Console Configuration
5-37