AirWorks AWK-3121 User's Manual
Load Factory Default
Use this function to reset the AWK-3121 and roll all settings back to the factory default values.
You can also reset the hardware by pressing the reset button on the top panel of the AWK-3121.
Password
You can change the administration password for each of the AWK-3121's console managers by
using the Password function. Before you set up a new password, you must input the current
password and reenter the new password for confirmation. For your security, do not use the default
password root, and remember to change the administration password regularly.
Misc. Settings
Additional settings to help you manage your AWK-3121, are available on this page.
Reset button
Always enable
Disable after 60 sec
Setting
The AWK-3121's Reset button works
normally.
The AWK-3121's reset to default function
will be inactive 60 seconds after the
AWK-3121 finishes booting up.
Description
3-46
Web Console Configuration
Factory Default
Always enable