Operating Settings - Moxa Technologies NPort IA 5250 series User Manual

NPort IA5150/5250 Series User's Manual
Baud rate
Setting
110 bps to 230400 bps
Data bits
Setting
5, 6, 7, 8
When the user sets Data bits to 5 bits, the Stop bits setting will automatically change to 1.5 bits.
Stop bits
Setting
1, 2
Stop bits will be set to 1.5 when Data bits is set to 5 bits.
Parity
Setting
None, Even, Odd, Space, Mark
Flow control
Setting
None, RTS/CTS, DTR/DSR, Xon/Xoff
FIFO
Setting
Enable, Disable
NPort IA5150/5250's serial ports provide a 16-byte FIFO both in the Tx and Rx directions. To
prevent data loss during communication, disable the FIFO setting when your serial device does not
have a FIFO.
Interface
Setting
RS-232
RS-422
2-wire RS-485
4-wire RS-485

Operating Settings

Click on Operating Settings, located under Main Menu, to display the operating settings for both
of NPort IA5150/5250's serial ports.
Web Console Configuration
Factory Default
115200 bps
Factory Default
8
Factory Default
1
Factory Default
None
Factory Default
RTS/CTS
Factory Default
Enable
Factory Default
RS-232
5-11
Necessity
Required
Necessity
Required
Necessity
Required
Necessity
Required
Necessity
Required
Necessity
Required
Necessity
Required