Com Mapping; On-Line Com Mapping - Moxa Technologies NPort IA 5250 series User Manual

Industrial serial device servers
Hide thumbs Also See for NPort IA 5250 series:
Table of Contents

Advertisement

NPort IA5150/5250 Series User's Manual

COM Mapping

Windows Administration Suite comes with Windows 95/98/ME/NT/2000/XP Real COM drivers.
After you install NPort IA5150/5250 Administration Suite, there are two ways to set up the NPort
IA5150/5250 serial port as your host's remote COM port.
The first way is with On-line COM Mapping. On-line COM Mapping will check to make sure
that the NPort IA5150/5250 is connected correctly to the network, and then install the driver on
the host computer.
The second way is with Off-line COM Installation, without first connecting the NPort
IA5150/5250 to the network. Off-line COM Mapping can decrease the system integrator's effort
by solving different field problems. Via off-line installation, users can first process software
installation for the host, and then install the NPort IA5150/5250 to different fields.
Use the following procedure to map COM ports:

1. On-line COM Mapping:

Connect NPort IA5150/5250 to the network
address
2. Off-line COM Mapping:
Map COMs to your host
Configure NPort IA5150/5250's IP address.
On-line COM Mapping
1. Broadcast Search for NPort IA5150/5250s on the network.
2. Select the COM Mapping function group.
Map COMs to your host
Apply Change
Configuring NPort Administrator
Set NPort IA5150/5250 to the proper IP
Apply Change.
Connect NPort IA5150/5250 to the network
6-20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents