DR-120-24: 120W/5A DIN-rail 24 VDC power supply with 88 to 132 • VAC/176 to 264 VAC input by switch Note: Notify your sales representative if any of the above items are missing or damaged. NPort IA5150 Series Appearance - 2 -...
Page 3
NPort IA5250 Appearance Reset Button—Press the Reset button for 5 seconds to load factory defaults. Use a pointed object, such as a straightened paper clip or toothpick, to press the reset button. This will cause the Ready LED to blink on and off.
Hardware Installation Procedure STEP 1: After removing the NPort IA from the box, the first thing you should do is connect the power adapter. Connect the 12-48 VDC power line with the NPort IA’s terminal block, or connect the DIN-rail power supply with the NPort IA’s terminal block.