Installing Windows 98 Se (For Reference Only) - EUROCOM 8500-V Super Notebook User Manual

Installing Windows 98 SE (For Reference
Only)
1. Start DOS.
2. Insert the Windows 98 CD-ROM.
3. Type "setup", then press Enter.
4. When the "Windows 98 Setup" program initializes, click Continue.
5. The "License Agreement" dialog box appears. Select "I accept the Agree-
ment" and click Next.
6. For "Windows Product key", enter the product's ID number and press
Next.
7. The "Select Directory" dialog box appears. Select the path of
"C:\Windows", or type another path if you pefer. Then click Next.
8. When you see "Setup Options", select "Portable" and click Next.
9. Follow the on-screen instructions and choose the recommended options.
10.When the program starts to set up your hardware, follow the on-screen
instructions and choose the recommended options.
11.Restart your computer.
Note: If your Windows 98 SE CD-ROM disk is bootable, you can change the
BIOS Setup Utility to boot from the CD-ROM and install Windows 98 SE
accordingly.
Chapter 6. Installing Drivers
6-3