Hardware Installation; Lcd Panel - EUROCOM 8500-V Super Notebook User Manual

User's Manual

Hardware Installation

Problem: The computer will not recognize the device as part of the
system.
Solution 1 : The new device is not powered on, please power on the device,
then restart the computer.
Solution 2: You did not properly configure the system for the new device or
install the device. Try reconfiguring the device or reinstalling the device using
the device manual and drivers.
Solution 3 : The computer is not properly connected to the device. Please
make sure the device is properly connected with the computer.
Solution 4 : You did not properly configure the system for the new device.
Please reconfigure the system according to the instructions which came with
the new device.

LCD Panel

Problem: The screen is blank.
Solution 1: The panel may be set for an external monitor, please reset to
normal display using the hot keys.
Solution 2: The screen saver is activated, please press any key or touch the
trackpad to return to your display.
Solution 3: The brightness needs to be adjusted.
Solution 4: The system is in suspend mode. Please press any key or the
Power button to wake up the computer.
Problem: The LCD panel displays incorrect fonts or blinks when the
computer is connected with an external monitor.
Solution: The external monitor resolution exceeds what the LCD panel can
support. Please disconnect the external monitor and restart the computer.
7-6