Epson Stylus PHOTO 2000P Service Manual page 131

EPSON Stylus PHOTO 2000P
7. In the Bi-D adjustment window, select the desirable item and click
The Adjust window for the selected print mode appears.
Figure 5-18. Bi-D Value Select Window
8. Referring to the printout, input the setting value using the
directly type it in.
9. Click . The setting value is written.
OK
10. Repeat the steps 4 to 8 until you get the best result.
11. In the Adjustment window, select Check present adjustment data and
click .
OK
12. The present adjustment value is displayed.
ADJUSTMENT
.
OK
Figure 5-19. Check Present Adjustment Data Window
13. Click Continue to go back to the Bi-D adjustment window.
↑ ↓
or key or
The setting value is not effective until the printer is next
C A U T I O N
turned off and back on. It is because the setting value is
stored in EEPROM when the printer is turned off.
Adjustment
Revision A
131