Epson Stylus PHOTO 2000P Service Manual page 114

EPSON Stylus PHOTO 2000P
4. Set SCALE, PF onto BRACKET, SCALE with its front side facing
downward.
Set the scale's front
side facing downward.
Tool (Code: 1051765)
Figure 4-61. Attaching SCALE, PF
Do not touch the following areas:
C A U T I O N
- Inner side of the SCALE, PF's shaft hole through which
the PF Roller Shaft is installed.
- Printed face of SCALE, PF
If BRACKET, SCALE is not aligned with the circle printed
on SCALE, PF, it should not be a problem.
DISASSEMBLY AND ASSEMBLY
SCALE, PF
Tool
(Code: 1051765)
Disassembly Procedures
5. Remove the base sheet of TAPE, D50 and stick it to SCALE, PF.
Protection Sheet
SCALE, PF
Tool (Code: 1051765)
Figure 4-62. TAPE, D50 Installation
If TAPE, D50 is not aligned with the circle printed on
C A U T I O N
SCALE, PF, it should not be a problem.
6. Peel off the protection sheet from TAPE, D50 on SCALE, PF.
Revision A
TAPE, D50
Protection Sheet
114