Epson Stylus PHOTO 2000P Service Manual page 104

EPSON Stylus PHOTO 2000P
While assembling the ASF Unit, be careful not to smear
C H E C K
any parts with oil on the cam parts. If oil gets other
P O I N T
parts, it should be wiped off.
When installing LEVER, HOPPER, RELEASE, set it in the
correct direction. (See Figure 4-39.)
Be sure to attach the following parts to SHAFT, ROLLER,
LD securely. (See Figure 4-38.)
- BUSHING, FIXING, SHAFT, LEFT (white plastic part)
- WHEEL, DETECTOR (black plastic part)
When installing the LD Roller Assemblies to SHAFT,
ROLLER, LD, make sure the black one (right LD Roller
Assembly) goes to the right.
When setting the right and left LD Roller Assemblies,
align their grooves with the rail rib in FRAME, ASF; B.
(See Figure 4-40.)
DISASSEMBLY AND ASSEMBLY
Figure 4-39. LEVER, HOPPER, RELEASE Installation
Figure 4-40. LD Roller Assembly Installation (1)
Disassembly Procedures
LEVER, HOPPER, RELEASE
Groove in the LD Roller
Assembly
Rail Rib in FRAME, ASF; B
Revision A
104