Motor Assembly, Pf Removal - Epson Stylus PHOTO 2000P Service Manual

EPSON Stylus PHOTO 2000P

4.2.14 MOTOR ASSEMBLY, PF Removal

1. Remove HOUSING. (Refer to Section 4.2.1)
2. Remove the ASF Unit. (Refer to Section 4.2.10.)
3. Remove the Carriage Unit. (Refer to Section 4.2.11.)
4. Remove ROLLER, PF. (Refer to Section 4.2.13.)
5. Remove the one plane washer (4.1x0.5x4.5) fixing the combination
gear (13.5, 30) to FRAME, LEFT, and then remove the combination
gear.
COMBINATION GEAR,
13.5, 30
Figure 4-64. Removing COMBINATION GEAR and PLANE WASHER
DISASSEMBLY AND ASSEMBLY
PLANE WASHER
(4.1x0.5x6.5)
Disassembly Procedures
6. Remove the one screw (CBS, 3x6), plane washer (3.3x0.5x8), and
SCREW, MOUNTING, PF that are securing MOTOR ASSEMBLY, PF to
FRAME, LEFT. Then remove MOTOR ASSEMBLY, PF.
MOTOR ASSEMBLY, PF
CBS (3x6), PLANE WASHER
Figure 4-65. PF Motor Removal
Be careful not to damage the teeth of COMBINATION
C A U T I O N
GEAR, 13.5, 30.
A D J U S T M E N T
If you replace MOTOR ASSEMBLY, PF, adjust backlash for
R E Q U I R E D
the PF pinion and SPUR GEAR, 76. (See Chapter 5.)
Revision A
SCREW, MOUNTING, PF
116