Epson Stylus PHOTO 2000P Service Manual page 115

EPSON Stylus PHOTO 2000P
7. Fit the round cutouts in SCALE, PF to the protrusions on SPUR GEAR
(76) making sure the scale and the gear are parallel. But note you
don't attach the scale to the gear yet.
8. Attach SCALE, PF to the gear using "Scale PF unit Assembling tool"
(AS tool code: 1051767).
SPUR GEAR, 76
SCALE, PF
Figure 4-63. Loop Scale Installation
DISASSEMBLY AND ASSEMBLY
Protrusions
Tool (#1051767)
Disassembly Procedures
Check that the protrusions on the gear (76) are sticking
C H E C K
out from the cutouts in the scale.
P O I N T
Ensure SCALE, PF is free form any dirt or damage.
Revision A
Protrusion
Cutout
115