Specifications For Cut Sheets; Table 14. Specifications For Continuous Papers; Figure 1-3. Release Lever Positions - Epson SQ-1170 Service Manual

3.
Push-pull tractor feed (release lever in REAR PUSH POSITION or FRONT PUSH POSITION).
The paper must be loaded from the front or rear entrance.
Release the friction-feed mechanism.
Attach the pull tractor unit.
Precisely adjust the horizontal position of the pull tractor and push tractor.
Paper for multiple copies must be spot pasted on both side of the perforation betvveen the tractor
holes.
Do not perform reverse feeds greater than 1/6 inch.
Do not perform a reverse feed after the paper end has been detected.
Paper specifications See tables 1-3, 1-4, 1-5, and 1-6
Width
Length
Thickness
Weight
Quality
Width
Quality
Thickness
Weight

Figure 1-3. Release Lever Positions

Table 1-3. Specifications for Cut Sheets
182 mrn to 257 mm
182 mm to 420 mm (7.2 in. to 16.5 in.) (136 columns)
182 mm to 364 mm (7.2 in. to 14.3 in.)
0.065 mm to 0.10 mm (0.0025 in. to 0.0039 in.)
14 lb to 22
lb (52.3
Standard paper (photocopier paper, etc.)
Table 1-4. Specifications for Continuous Papers
I
101 mm to 254 mm (4.0 in. to 10.0 in.) (80 columns)
Stan jard paper
0.065 mm to 0.10 mm (0.0025 in. to 0.0039 in.)
14
22 lb (52.3 g/m2 to 82 g/m2)
Rear Push Position
Release Position
(7.2 in. to 10.1 in.) (80 columns)
82
1-4
f - '