Epson SQ-1170 Service Manual page 113

3.2.7.11 Disassembly of FRAME ASSY., RIGHT
Remove the housing. (Refer to section 3.2. 1.)
[Step 1]
[Step 2] Remove the printer mechanism. (Refer to section 3.2.4.)
Remove the CAP ASSY.. (Refer to section 3.2.7.2.)
[Step 3]
[Step 4] Remove the FRAME, FRONT. (Refer to section 3.2.7.4.)
[Step 5] Remove the STEPPING MOTOR, PF. (Refer to section 3.2.7.7.)
Remove the PAPER HOLDING ASSY.. (Refer to section 3.2.7. 1.)
[Step 6]
[Step 7] Remove the PLATEN ASSY.. (Refer to section 3.2.7.9.)
[Step 8] Unscrew C.C. screw (M3 X 8) which fastens the FRAME, SUB, RIGHT, and remove the
SUB, RIGHT.
Remove
[Step 9]
[Step 10] Remove the INTERMITTENT GEAR and the SPUR GEAR (27) from the FRAME ASSY., RIGHT.
Remove the COMBINATION GEAR (8, 30) from the shaft (C) on the FRAME ASSY., RIGHT.
[Step 1 1]
[Step 12] Remove the COMPRESSION SPRING (200), the PLAIN WASHER (10.3 X 0.5 X 18.7), and
the SPUR GEAR (34.5) from the shaft (B) on the FRAME ASSY., RIGHT.
Remove the COMPRESSION SPRING (200), the PLAIN WASHER (8 X 0.5 X 15), and the SPUR
[Step 13]
GEAR (34.5) from the shaft (A) on the FRAME ASSY., RIGHT.
c
the release lever from the FRAME ASSY., RIGHT.
Shaft (C)
Figure 3-36. Disassembly of Frame Assembly, RIGHT
3-33
FRAME,
)
B, RIGHT
B)