Epson SQ-1170 Service Manual page 108

3.2.7.9 Disassembly of PLATEN ASSY.
[Step 1] Remove the housing. (Refer to section 3.2.1.)
[Step 2] Remove the printer mechanism. (Refer to section 3.2.4.)
[Step 3] Remove the CAP ASSY.. (Refer to section 3.2.7.2.)
[Step 4] Remove the FRAME, FRONT. (Refer to section 3.2.7.4.)
[Step 5] Remove the PAPER HOLDING ASSY.. (Refer to section 3.2.7.1.)
LEFT/RIGHT, and remove the COVER, PLATEN.
[Step 7] Remove the E-ring (3) which fixes the GUIDE, PAPER EJECT to the left frame and remove the
GUIDE, PAPER EJECT.
[Step 8] Unscrew the 2 screws (C.B.B. screw (M3X6)) which fasten the PAPER GUIDE ASSY.,
SUPPORT to the frame, LEFT/RIGHT, and remove the PAPER ASSY., SUPPORT.
[Step 9] Remove the PUMP ASSY. and the CLEANER ASSY.. (Refer to section 3.2.7.3.)
[Step 10] Unscrew C.B. screw (M2X4) which fastens the SENSOR SUB ASSY., PW to the TOP EDGE
HOLDER., and remove the SENSOR SUB ASSY., PW while separating the FPC (connected
to the sensor) from the adhesive double coated tape.
[Step 11] Hook off the GROUNDING SPRING.
TOP
HOL
ASS
(M3x 8)
PAPER GUIDE ASSY.,
SUPPORT
Figure 3-30. Disassembly of PLATEN ASSY. (1)
3-28
ing (3)