Printer Mechanism Removal - Epson SQ-1170 Service Manual

Table of Contents

Advertisement

3.2.4 Printer Mechanism Removal

This section describes how to remove the printer mechanism.
When working with the printer mechanism, take sufficient care in handling the ink.
Carefully read the precautions in 3.1.1 before beginning the work.
Discharge ink from the printer before removing the printer mechanism.
[Step 1]
Remove the housing. (Refer to section 3.2. 1.)
2 ]
Discharge the ink in the ink path of the printer mechanism. (Refer to section 3.1. 1.)
[Step
[Step 3]
Unscrew 3 C.C.U. screws (M3 X 8) and 1 C.B.B. screw (M3 X 12) to remove the SHIELD PLATE,
I/F.
SHIELD PLATE, l/F
[Step 4]
Separate the pump tube from the wasted ink drain tank.
[Step 5]
Remove the TUBE, SUPPLY, INK from the ink cartridge holder by removing the TUBE SET
SCREW that fastens the TUBE, SUPPLY, INK to the cartridge holder.
[Step 6]
Remove the cords (connected to the DETECTOR ASSY., INK CARTRIDGE and the DETECTOR
W A R N I N G
C A U T I O N
Figure 3-13. Removing SHIELD PLATE, l/F
Figure 3-14. TUBE, SUPPLY, INK Removal
3-15
Printer Mechanism
MAIN Board
tridge Holder
REV.-A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sq-870

Table of Contents