Epson SQ-1170 Service Manual page 102

REV.-A
3.2.7.3 Disassembly of PUMP ASSY. and CLEANER ASSY.
[Step 1]
Remove the housing. (Refer to section 3.2. 1.)
[Step 2]
Remove the printer mechanism. (Refer to section 3.2.4.)
[Step 3] Remove the CAP ASSY.. (Refer to section 3.2.7.2.)
[Step 4]
Remove the TUBE, SUPPLY, INK, from the PUMP ASSY..
[Step 5]
Unscrew two screws (C.B.S. screw (M3X 8)) which fasten the PUMP ASSY. to the frame, and
remove the PUMP ASSY..
[Step 6]
Separate the CLEANER ASSY. from the frame.
Never touch the rubber section of the CLEANER ASSY..
Figure 3-22. Disassembly of PUMP ASSY. and CLEANER
3-22
Screws (M3x8)