Epson SQ-1170 Service Manual page 101

3.2.7.2 Disassembly of CAP ASSY.
[Step 1] Remove the housing. (Refer to section 3.2. 1.)
[Step2] Remove the printer mechanism. (Refer to section 3.2.4.)
[Step 3] Unscrew the 3 screws (C.B.S. screw (M3x8)) which fasten the FRAME, STRENGTHEN LEFT,
and remove the FRAME, STRENGTHEN RIGHT.
[Step 4] Unscrew C.B.B. screw (M3x8)which fastens the CAP ASSY. to the FRAME, FRONT, and remove
the CAP ASSY..
[Step 5] Separate the tube of the PUMP ASSY. from the CAP ASSY..
FRAME, STRENG THEN RIGHT I
Figure 3-21. Disassembly of CAP ASSY.
3-21
CAP ASSY.
REV.-A