Specifications For Cut Sheets; Table 1-6. Envelopes - Epson LQ-1070 Service Manual

Table 1-4. Specifications for Cut Sheets (Carbonless Duplicating Paper)
Width
Length
Thickness
Weight
Quality
Copies
Width
Thickness
Weight
Quality
Copies
Size
Thickness
Weight
Quality
Copies
NOTES: Printing on envelopes is available only at normal temperatures and only using top insertion.
Keep the longer side of the envelope horizontal during insertion.
Place the left edge of a No. 6 envelope at"the sheet guide setting mark.
Label size
Copies
Thickness
NOTES: Printing on labels is available only at normal temperatures.
Labels must be of the fanfold type.
Labels with pressure sensitive paper must be spot pasted beyond the perforation between
the tractor holes. The total thickness must be less than or equal to 0.3 mm (0.01 18 in.).
Labels can be printed out only if the temperature is between 5 and 35 degrees C (41 and
95 degrees F) and humidity is between 10 % and 80 % RH.
Examples of labels AVERY CONTINUOUS FORM LABELS
Labels must be used with the pull tractor (front or bottom).
Do not perform reverse feeds.
182 mm to 216 ('364) mm (7.2 in. to 8.5 (* 14.3) in.)
257 mm to 297 mm (10.1 in. to 11.7 in.)
0.065 mm to 0.14 mm (0.0025 in. to 0.0055 in.) - single sheet
0.12 mm to 0.32 mm (0.0047 in. to 0.012 in.) - total
17 lb. to 24 lb. (52.3 g/m2 to 90 g/m2) - single sheet
12 lb. to 15 lb. (40 g/m2 to 58 g\m2) - each
Carbonless duplicating paper
4 sheets (1 original and 3 copies)
Table 1-5. Specifications for Continuous Paper
101 mm to 254 ("406) mm (4.0 in. to 10.0 (* 16) in.)
0.065 mm to 0.10 mm (0.0025 in. to 0.0039 in.) - single sheet
0.065 mm to 0.32 mm (0.0025 in. to 0.012 in.) -total
14 lb. to 22 lb. (52.3 g\m' to 82 g/m2) - single sheet
12 lb. to 15 lb. (40 g/m2 to 58 g/m2) - each
Standard paper or carbonless duplicating paper
Recycled paper (at normal temperatures)
4 sheets (1 original and 3 copies)

Table 1-6. Envelopes

No. 6= 166 mm X 92 mm
No. 10= 240 mm X 104 mm
0.16 mm to 0.52 mm (0.0063 in. to 0.0197 in.)
Differences in thickness within the printing area must be less than
0.25 (0.0098 in.)
mm
12 lb. to 24 lb. (40 g/m2 to 91 g/m2)
Bond paper, standard paper, airmail
Not available
Table 1-7. Label Specifications
2 1/2 in. X 15/16 in.
4 in. X 15/16 in. "
4 in. X 1 7/16 in.
Not available
0.07 mm to 0.09 mm (0.0028 in. to 0.0031 in.) - base paper
0.16 mm to 0.19 mm (0.0063 in. to 0.0075 in.) -total
AVERY MINI-LINE LABELS
1-5
(*136-column
REV.-B