Epson SQ-1170 Service Manual page 109

[Step 12] Rotate the HOLDER, PLATEN, RIGHT and HOLDER, PLATEN, LEFT which fasten the PLATEN
When assembling the GUIDE, PAPER EJECT be sure to hook the TORSION SPRING 700 to the
GUIDE PAPER EJECT.
When attaching the SENSOR SUB ASSY., PW make sure the adhesive double coated tape is
completely covered by
Before setting the platen, set up
Take the alignment of the HOLDER, PLATEN, RIGHT and HOLDER, PLATEN, LEFT.
HOLDER, PLATEN, LEFT/RIGHT
Figure 3-31. Disassembly of PLATEN ASSY. (2)
ASSEMBLY POINTS
FPC.
other parts
the
Figure 3-32. Aligning HOLDER, PLATEN
as shown in the figure below.
3-29