Ref. No.
Sliding surface of the LEVER, RELEASE, SUB.
(2)
The left shaft of the ROLLER ASSY., DRIVER and the inner side of the
FRAME ASSY., LEFT.
(3)
HOLDER, PLATEN, RIGHT
(4)
HOLDER, PLATEN, LEFT
(5)
Carriage pad and CARRIAGE, SUB
Table 6-3. Adhesive Application Points (Refer to Figure 6-2 to Figure 6-3.)
r
Ref. No.
I
Screw fastening top edge assembly (1/4 of the perimeter)
Screw fastening SENSOR ASSY., PW (1/4 of the perimeter)
Timing belt (2 teeth)
Head fastening screw (right-side only) (1/4 of the perimeter)
LEVER, PARALLEL, ADJUST (1/4 of the perimeter)
I
FLANGE NUT (M4) of the lever G, ADJUST holder (1/4 of the perimeter)
Lubrication Points
Adhesive Application Point
6-2
Lubricant
G-1 4
G-14
G-1 4
G-1 4
o-5
No. of Points
2
3