Printer Mechanism Unit Removal - Epson Stylus COLOR 1520 Service Manual

3.2.6 Printer Mechanism Unit Removal

1. Remove the upper housing. (Refer to Section 3.2.1.)
2. Disconnect the connector cables from the connectors CN3, CN4, CN8, CN9, CN10, CN11, CN12,
CN13, CN14, and CN15 on the C211 MAIN Board.
3. Remove 4 screws (CBB, 4X14) securing the printer mechanism unit to the lower housing.
4. Lift up the printer mechanism unit and remove it.
; Be sure to lubricate the front top edge of the paper eject frame after installing the ASP printer
mechanism unit, which is not lubricated.
; After replacing the printer mechanism unit, perform the following:
(Refer to Chapter 4.)
„ Input the head data which is marked on the package.
„ Bi-directional adjustment.
Rev. A
WORK POINT
REQUIRED ADJUSTMENT
Figure 3-8. Printer Mechanism Removal
Disassembly and Assembly
3-11