Cover Open Sensor Operation; Default Setting; Setting Method - Epson Stylus COLOR 1520 Service Manual

1.4.4 Cover Open Sensor Operation

The cover open sensor equipped with this printer controls the carriage movement which has a possibility
to hurt the user. The sensor performs followings:
‰ The printer cover opens during printing:
„ The CR returns to the home position slowly after executing printing for the current pass. The cover
open LED lights up and the printer goes into the stand-by status.
„ To recover, close the cover and press the pause button to continue to print. The cover open LED
goes off with the recovery.
‰ The printer cover opens during cleaning:
„ The printer completes the cleaning sequence. If the cover is still open after the cleaning, the cover
open LED lights up and the printer goes into the stand-by status.
„ To recover, close the cover and press the pause button to continue to print. The cover open LED
goes off with the recovery.
‰ The printer cover opens While the printer is in the stand-by status:
„ The cover open LED lights up and the printer stops functioning. *
„ To recover, close the printer cover.
*1 :The interface is in the Busy status and the switches on the control panel are effective.

1.4.5 Default Setting

This printer has user-selectable default settings to which it refers at initialization. This section describes
setting method and setting menus.

1.4.5.1 Setting Method

See the flow chart in Page 1-26 for the default setting method.
; Be sure to turn off the printer off once after the default setting operation is executed, since
adjustment values are not stored in the EEPROM until the printer is turned off.
; The latest adjustment values set before power-off are stored in the EEPROM.
Rev. A
1
CAUTION
Product Description
25